Composition structure of high and low temperature test chamber

      The high and low temperature test chamber is a widely used test equipment on the market. Mainly used for high temperature and low temperature reliability test of industrial products. Its structure is as follows:

1. The body of the high and low temperature test box is processed by CNC machine tools, with beautiful and generous appearance, and the use of non-reactional handles, which is easy to operate.

2. high and low temperature test chamber The inner tank of the box uses imported high-quality stainless steel (SUS304) mirror panel, and the outer tank uses A3 steel plate spray, which increases the appearance and cleanliness.

3. The water replenishment tank is placed in the lower right part of the control box and has automatic protection against water shortage, which is more convenient for the operator to replenish water.

4. high and low temperature test chamber The large observation window is equipped with illuminators to keep the inside of the box bright, and the built-in tempered glass in the heating body is used to clearly observe the situation inside the box at any time.

5. The humidification switch pipeline is separated from the control circuit board, which can avoid failures due to water leakage in the humidification pipeline and improve safety.

6. Waterway switcher The pipeline circuit switcher uses door opening, which is convenient for personnel to maintain and overhaul.

7. Use double-layer high-temperature-resistant high-tensile sealing strips between the test box door and the box body to ensure the tightness of the debugging area.

8. The left side of the box is equipped with a debugging hole with a diameter of 25mm or 50mm or 100mm, which can be used for external debugging of power lines or signal lines. (The aperture or number of holes must be increased when ordering)

9. The bottom of the machine uses high-quality fixed PU movable wheels.