Phone : +86 0769-83482055 / +8615338361334 Email: dg@huanyi-group.com
facebook twitter linkedin google+ printerest
You are here: Home > Technical Literature > Conditions for measuring formaldehyde emission from furniture made by people using formaldehyde emission environmental chamber

Conditions for measuring formaldehyde emission from furniture made by people using formaldehyde emission environmental chamber

Date: Apr 22,2022 Views: 220

Many of the furniture today are made of wood-based panels, and the formaldehyde emission of wood-based panels is harmful to the human body, so it is necessary to use the formaldehyde emission environmental chamber to detect its emission. According to my country's standard regulations, the determination of formaldehyde emission should meet the following requirements.

 

1. Determination principle of formaldehyde emission:

Determination of formaldehyde emission by the desiccator method is based on the following two steps:

Step 1: Collect formaldehyde: place a crystallization dish containing distilled water at the bottom of the desiccator, place a test piece on a metal support fixed above it, and the released formaldehyde is absorbed by distilled water as a sample solution.

Step 2: Determination of formaldehyde concentration: Measure the absorbance of the sample solution with a spectrophotometer, and obtain the formaldehyde concentration from the pre-drawn standard curve.

 

2. Preparation of equipment:

Test equipment: formaldehyde emission environmental chamber

Equipment model: HYQ-1000

Equipment manufacturer: Huanyi Instrument

 

3. Preparation of samples:

Quantity: 10

Specifications: length (150±1) mm*width (50±1) mm

 

4. Sample edge sealing and storage:

After sawing, the end face of the specimen should be sealed with paraffin wax or formaldehyde-free tape with a melting point of 65°C immediately. The number of edge seals on the end face of the test piece should be the original actual number of edge seals of the part, and at least 50mm of unsealed edges should be reserved.

 

Test pieces should be prepared in the laboratory. The test should be started within 2 hours after the preparation of the test piece, otherwise the test piece should be remade.

The above are the conditions for measuring the formaldehyde emission of furniture made by people using the formaldehyde release environment chamber. If you want to know more about the measurement steps, you can visit the official website of "Huanyi Instrument".




Prev New Next New

Contact us

Telphone: +86 0769-83482055 / +8615338361334

Fax: +86 0769-83482056

Email: dg@huanyi-group.com

Add: Building 2, No. 3, Longkeng Xingye Road, Dongkeng Town, Dongguan,China

google+ twitter facebook printerest linkedin
Copyright 2018 by Dongguan Huanyi Instrument Technology Co., Ltd. All rights reserved. Powered by Onepound
Online Service
Top