High temperature laboratory of thermal shock test chamber

The controller detects the  thermal shock test chamber real-time signal from the temperature sensor, compares it with the set temperature signal, and uses the meter PID logic circuit output signal to control  thermal shock test chamber the switching time ratio of the solid-state relay after obtaining the comparison signal, and adjusts the heater output power to achieve the set Temperature.

 thermal shock test chamber Impact temperature test room

 thermal shock test chamber According to the temperature and humidity to be tested, the instrument automatically controls the high and low temperature air valves, switches between low temperature and high temperature storage rooms, and forms a closed-circuit air circulation system with the high temperature chamber or low temperature chamber to quickly reach the test target temperature.

The internal temperature state of the thermal shock test chamber is determined by the working state of the heater, evaporator and fan in the air duct. The working chamber of the thermal shock test chamber adopts forced axial flow scattered loop wind, which can greatly improve the volatility and uniformity of equipment operation.