You are here: Home > Technical Literature > High temperature stacking test chamber operation specification
High temperature stacking test chamber operation specification
Date: Apr 19,2024 Views: 125
High-temperature stacking test chamber operation specification
1. Preparation work before equipment operation of stacking test chamber
(1) Check whether there are containers and items stored in the high temperature stacking test chamber, if so, it should be cleaned up first.(2) Check whether the power supply and air compressor is normal, and confirm that the power supply has been connected.
(3) Check whether the temperature controller of high temperature stacking test chamber is set correctly.
(4) Check whether the high-temperature stacking test chamber protective cover is intact and has been installed in place.
(5) Check whether the vent inside the high temperature stacking test chamber is smooth.
2. Stacking test chamber start and stop
(1) Open the door of the high temperature stacking test chamber and put the container to be tested into the test chamber.(2) Adjust the fan speed and temperature controller, set the test temperature and time according to the requirements.
(3) Confirm that the set parameters in the high-temperature stacking test chamber are correct, press the equipment start switch, and the equipment will start running.
(4) Before the end of the test, do not open the door of the high-temperature stacking test chamber, so as not to affect the test data.
(5) After the test is completed, press the equipment stop switch to close the high temperature stacking test chamber.
3. Equipment maintenance of stacking test chamber
(1) After each use of high temperature stacking test chamber, the equipment should be cleaned internally to keep the equipment clean and tidy.(2) High-temperature stacking test chamber in the long term when not in use, should be disconnected from the power supply and thoroughly cleaned and stored.
(3) Regularly check the high-temperature stacking test chamber circuit, power cord and fan is normal, if found problems timely maintenance.
(4) High-temperature stacking test chamber is susceptible to corrosion, so attention should be paid to anti-corrosion care of the equipment.
(5) Prohibit flammable and explosive substances into the high-temperature stacking test chamber, so as not to cause safety accidents.
4. Precautions of stacking test chamber
(1) In the test process, the temperature change in the high temperature stacking test chamber should be monitored to ensure the accuracy of the test data.(2) During the operation of the equipment, it is strictly prohibited to open the door of the high-temperature stacking test chamber, so as not to affect the test data.
(3) High-temperature stacking test chamber is a high-temperature test equipment, the operation of the necessary training should be carried out before the operation, and after the guidance of professional personnel can operate.
(4) If you find abnormal equipment, abnormal sound, odor and other conditions, you should immediately stop the equipment and contact the relevant personnel for maintenance.
(5) During the operation of the equipment, the environment around the equipment should be kept clean so as not to affect the equipment.
Through this article, we understand the high-temperature stacking test chamber operation specification. Correct use of high-temperature stacking test chamber can not only ensure the accuracy of the test data, but also to avoid unnecessary losses caused by improper operation. For more equipment parameters, you can visit the official website of Huanyi Instruments.
