Phone : +86 0769-83482055 / +8615338361334 Email: dg@huanyi-group.com
facebook twitter linkedin google+ printerest
You are here: Home > Technical Literature > How to use one cubic meter of formaldehyde emission test chamber?

How to use one cubic meter of formaldehyde emission test chamber?

Date: Sep 18,2020 Views: 395

What should I pay attention to when using the formaldehyde test chamber?
1. Open the water tank filling valve cover, add water to the designated water level of the dew point water tank and the temperature water tank, and turn on the switch;

2. Insert the power plug of the device into a power socket larger than 16A;

3. Turn on the "Start" button on the box, and there is a display screen on the meter. If there is no buzzer or alarm after 5 seconds, the water level is normal;

4. Adjust the scale of the gas flow meter to a flow rate of 1m3/H and observe the water level in the glass tube of the dew point water tower. Generally, when the water pump and the air pump are working at the same time, the water level will be in a relatively stable state and keep this state;

5. Click the "light switch" to select the lighting to observe the working status in the box;

6. The water in the temperature-controlled water tank is changed every 2 months, and the water in the dew point water table is changed every 1 month (distilled water or deionized water)

7. Do not store or use the equipment in a sub-zero environment. If it must be placed in a sub-zero environment, all water in the equipment (pipeline, heat exchanger, water pump, water tank, water tower) must be drained.





Prev New Next New

Contact us

Telphone: +86 0769-83482055 / +8615338361334

Fax: +86 0769-83482056

Email: dg@huanyi-group.com

Add: Building 2, No. 3, Longkeng Xingye Road, Dongkeng Town, Dongguan,China

google+ twitter facebook printerest linkedin
Copyright 2018 by Dongguan Huanyi Instrument Technology Co., Ltd. All rights reserved. Powered by Onepound
Online Service
Top