Phone : +86 0769-83482055 / +8615338361334 Email: dg@huanyi-group.com
facebook twitter linkedin google+ printerest
You are here: Home > Technical Literature > Korea KS C IEC 60068-2-13-2022 standard high altitude low pressure test chamber

Korea KS C IEC 60068-2-13-2022 standard high altitude low pressure test chamber

Date: Mar 20,2023 Views: 259

Edit | Huanyi instrument

 

KS C IEC 60068-2-13-2022 is the standard for environmental tests in Korea. Part 2-13 describes test M: Low pressure. The purpose of the test is to assess the performance and reliability of the electronic equipment at high altitude and low pressure, and to test whether it meets the relevant standards and regulatory requirements. The following is the content of test M: low pressure in this standard.

 

I. Test device:

High Altitude Low pressure test chamber (Model: Huanyi Instrument HYLA-1000)

 

Ii. The test device shall meet the following conditions:

Can reduce the air pressure to meet the test requirements;

 

Able to control temperature and humidity to meet test requirements;

 

Having sufficient structural strength and stability to withstand the load during testing;

 

Adequate sealing to prevent air pressure leakage.

 

3. The test procedure shall include the following steps:

1. Place the test object in the test device and wait for the balance between the test object and the test environment;

 

2. Gradually reduce the air pressure until the required air pressure is reached;

 

3. Test the test object and record the test data under the air pressure required by the test;

 

4. Restore the air pressure to normal pressure, take out the test object and conduct subsequent data analysis and evaluation.

 

Four, low pressure test should be based on the specific test needs, record and evaluate the following parameters:

1. Pressure value: During the test, the pressure value required by the test should be recorded, as well as the actual pressure value during the test;

 

2. Temperature and humidity: During the test, the temperature and humidity inside the test device should be recorded;

 

3. Performance and reliability of the test object: During the test, record the performance indicators of the test object and whether faults or anomalies occur during the test.

 

To learn more about the low pressure test requirements in KS C IEC 60068-2-13-2022, visit Huanyichamber.com and consult your technical support personnel.




Prev New Next New

Contact us

Telphone: +86 0769-83482055 / +8615338361334

Fax: +86 0769-83482056

Email: dg@huanyi-group.com

Add: Building 2, No. 3, Longkeng Xingye Road, Dongkeng Town, Dongguan,China

google+ twitter facebook printerest linkedin
Copyright 2018 by Dongguan Huanyi Instrument Technology Co., Ltd. All rights reserved. Powered by Onepound
Online Service
Top