Matters needing attention when high temperature and high humidity chamber do high temperature

The high temperature and high humidity chamber can accurately simulate the complex natural environment of low temperature, high temperature, high temperature and high humidity, low temperature and low humidity. Today, the editor tells you what to pay attention to when the high temperature and high humidity chamber is used for high temperature:

When the high temperature and high humidity chamber is doing high temperature test, please turn on the power switch first, and then set the meter according to the temperature controller manual. After setting the parameters during high temperature test, there is no need to press other switches (directly press the up key or Down key), the meter will automatically enter the heating and temperature control state.

It is forbidden to test explosive, flammable and highly corrosive substances.

Circuit breakers, over-temperature protection, high-temperature and high-humidity chamber test products and operator safety protection, so please check regularly.

During operation, please do not open the door unless necessary. The low temperature test chamber may cause the following unfavorable consequences. 1) The high-temperature air rushes out of the chamber, which is very dangerous. 2) High temperature air may trigger a fire alarm and cause malfunctions.

If the heating test product is placed in the high temperature and high humidity chamber, please use an external power supply for the power control of the test product, and do not directly use the power supply of the machine. Pay attention when putting high-temperature samples into the test: the time for opening the door of the chamber should be as short as possible.