Matters needing attention when operating the tensile testing machine

Tensile testing machine is also called universal material testing machine. The universal testing machine is a mechanical afterburner testing machine for static load, tension, compression, bending, shear, tear, peeling and other mechanical properties of various materials. It is suitable for plastic plates, pipes, profiles, Various physical and mechanical performance tests of plastic film and rubber, wire and cable, steel, glass fiber and other materials are developed as materials, which are indispensable inspection equipment for physical testing, education and research, quality control, etc. The tension machine fixture is an important component of the instrument In part, different materials require different fixtures, which is also an important factor in whether the test can proceed smoothly and the accuracy of the test results. So let's explain to you what you should pay attention to when operating the tensile testing machine.

1. Overload and overspeed operation will only bring death and damage to the tensile testing machine, and will also affect future experimental results. Therefore, such wrong operations must be eradicated.

2. Try not to place heavy and hard objects around the tensile testing machine to avoid hard objects hitting the lifting screw.

3. When the fixture of the tensile testing machine moves up and down, if it shakes, it should be stopped immediately to avoid friction with the machine itself. The looseness of the fixture screws must be checked before each experiment.

4. When replacing the fixture, be sure to choose the correct fixture to avoid affecting the experimental results.

5. The connection process between the microcomputer and the tensile testing machine must be stopped according to the manual, which may cause the experienced operator to stop the correct connection.

6. When printing the effect of the tensile testing machine, it depends on whether the printer can be used.

 7. After the application is finished, remove the fixture and the object to be measured, which is convenient for the next application.

 8. Then please be sure to click the close button on the computer, remember not to turn off the power switch indirectly.