Measures to prevent ice blocking in high and low temperature test chambers

 high and low temperature test chamber In the pressurized leak test, the ability to completely remove the moisture in the intake part and keep the moisture out is the key to preventing ice blockage. Here are several effective methods for your reference.

 high and low temperature test chamber Make a high-efficiency filter drier: Find an iron can with a sealed lid, drill a 6mm round hole at the bottom of the box, and weld a section of ￠ copper pipe at the bottom of the box for a high and low temperature test box. According to the effective volume of the iron tank) dry calcium chloride (choose a large piece) into thick nylon stockings or nylon cloth bag, put it in the iron tank and cover tightly, when not in use, put the two tubes The mouth is plugged securely, and the low-temperature test box prevents humid air from entering. When in use, remove the plug and connect the exhaust port to the compressor intake pipe with a hose.  high and low temperature test chamber After use, be sure to seal the two pipe ports securely.