You are here: Home > Technical Literature > Microcomputer controlled electronic universal testing machine
Microcomputer controlled electronic universal testing machine
Date: Feb 01,2024 Views: 70
Microcomputer controlled electronic universal testing machineThe microcomputer-controlled electronic universal testing machine is specially designed for testing composite mortar insulation systems, polystyrene board thin plaster exterior wall insulation systems, rigid polyurethane foam composite board exterior wall insulation systems and other exterior wall insulation systems and roof insulation materials. Developed for physical and chemical performance testing.
Applicable standards for this machine:
JC/T992-2006 "Expanded polyethylene board adhesive for wall insulation"
JC/T993-2006 "Expanded polyethylene board plastering mortar for external wall insulation"
JC/T547-2005 "Adhesive for ceramic floor tiles"
JG149-2003 "Expanded polystyrene board thin plaster exterior wall insulation system"
JC890-2001 "Masonry Mortar and Plastering Mortar for Autoclaved Aerated Concrete"
JC/T907-2002 "Concrete Interface Treatment Agent"
JG158-2004 "Exterior wall insulation system of rubber powder polystyrene particles"
DBJ01-38-2002 "Technical Regulations for Exterior Wall Insulation Construction Polymer Cement Mortar Adhesives"
DBJ/T01-50-2002 "Technical Regulations for Exterior Wall Insulation Construction Flexible Water-Resistant Putty"
1. Product description
●Host machine: This machine is a desktop single-space door-type structure, with stretching and compression in the lower space. The main machine part consists of double columns, double screws, upper beam, middle beam, and workbench, forming a portal structure. The speed control system is installed at the lower part of the workbench. The transmission principle is based on the Japanese Panasonic AC servo motor with high speed regulation accuracy, wide range and stable performance, which is decelerated by the synchronous toothed belt and planetary gear reduction system and then drags the ball screw pair to rotate, driving the middle beam to move up and down, thereby driving the stretching, The compression and other attachments move up and down to load and unload the specimen. This structure ensures that the frame has sufficient rigidity while achieving efficient and smooth transmission. The main components of the host are processed in the machining center to ensure the accuracy of the host. The ball screw is E5 grade.
●Standard configuration of attachments: one set of single-clamping tension attachments and one set of compression attachments.
●Electrical system:
(1) It adopts Japanese Panasonic AC servo driver and AC servo motor, with stable and reliable performance, and has overcurrent, overvoltage, overspeed, overload and other protection devices. The speed regulation ratio can reach 1:100000.
(2) It has protection functions such as overload, overcurrent, overvoltage, upper and lower displacement limits and emergency stop.
(3) The electrical control circuit refers to international standards and complies with the national testing machine electrical standards. It has strong anti-interference ability, ensuring the stability of the controller and the accuracy of experimental data.
2. Main technical parameters
Serial numberTechnical nameTechnical parameters
1Testing machine level 1
2Maximum test force (kN)1
3 Test force measurement range: 2%~100% of the maximum test force
4. The relative error of the test force indication value is less than or equal to ±1% of the indication value.
5 test power resolution 200000 yards
6. Relative error of displacement indication value ≤±1% of indication value
7Displacement resolution (mm)0.001
8 Displacement rate adjustment range (mm/min) 0.005~500, stepless speed regulation
9 Relative error of displacement rate indication ≤±1% of indication
10 Host overall dimensions (mm) 610×480×1285
11 Test space width (mm) 400
12 Stretch stroke (mm) 700
13 Compression stroke (mm) 700
14 Maximum stroke of cross beam (mm) 850
15 Host mass (kg) 100
16 host power supply 0.4kW, AC220V±10%
17 Working environment room temperature 10℃～35℃, humidity 20%～80%
