1. The inner and outer tanks are made of epoxy glass fiber reinforced plastic integrally molded, which have the characteristics of light weight, corrosion resistance, high strength, no leakage, smooth surface, smooth and easy to clean. 2. The water-sealed form prevents the salt spray from overflowing, and the...
1. The ambient temperature of the installation site should not change too much. The large temperature difference between cold and hot is bound to affect the high temperature box. 2.high temperature box Keep away from the wall or other objects as much as possible when placing it, and the distance is about...
1) constant temperature and humidity test chamber First check Start by checking the under-water over-temperature protector in the control room to see if it is set at 150°C. If it is not set at 150°C, please turn the under-water over-temperature protector to 150°C; 2) constant...
1. Placement The proper placement of the constant temperature and humidity test box is also one of the important factors affecting electricity consumption. Generally, put the device in a cool and ventilated place, avoid direct sunlight, and leave proper space on the top, front, back, left, and right of the...
Overview of high temperature aging test chamber The high temperature aging test box is also called high temperature aging test chamber, aging box, high temperature oven, high temperature oven, heat aging test box. The high temperature box is used for thermal aging test detection of various electronic products...
Precautions for the use of high and low temperature test chamber Use safety information: 1. Avoid high temperature burns The temperature inside the high and low temperature test chamber is very high during the high temperature test. During the test or just after the test, if you...
Installation safety information of high and low temperature test chamber 1. high and low temperature test chamber Power The high and low temperature test box uses three-phase five-wire power supply, and the equipment cable is four-core wires, three phase wires, and one neutral wire. Please...
Sometimes, customers will ask whether the constant temperature and humidity test chamber can be equipped with a glass door. Of course, the answer is yes. As a constant temperature and humidity test chamber manufacturer, it is necessary to provide customers with satisfactory solutions according to customer...
Product name: automotive interior parts testing environment cabin, vehicle VOC sampling environment cabin Manufacturer: Dongguan Huanyi Instrument automotive interior parts testing environment cabin Car interior parts and vehicle VOC test performance: 1,automotive interior parts testing...
VOC test chamber for car interior parts by bag method 1. Test principle 1. Testing principle of volatile organic components VOC test chamber for car interior parts by bag method After placing the test material in a sealed nitrogen and heating it at a specified temperature for 2 hours, a...
Product Name: Bag-style sampling cabin for interior parts Meet the standard: CVTC 54072—2015 "Test Method for Volatile Organic Compounds and Aldehydes and Ketones in Vehicle Interior Parts (Bag Method)" 1. Test procedure 1.1 Bag-style sampling cabin for interior parts Blank cleaning of...
Product name: VOC test chamber for car interior parts by bag method One, sample processing 1.VOC test chamber Weigh and record the sample mass W. 2. Open the gas sampling bag that has passed the blank test and place the sample to be tested. 3. VOC test chamber Use a film...