Requirements for the installation site of the high and low temperature test chamber

The place where the high and low temperature test chamber equipment is installed must meet the following conditions:
1. The ambient temperature of the installation site should not change too much. The large temperature difference between cold and hot will inevitably affect the high temperature box.
2. Keep away from the wall or other objects as much as possible when placing it, the distance is about 50cm
3. In order to stabilize the performance and function of the high and low temperature test chamber, we should choose a place with a temperature of 15-25 degrees and a humidity of no more than 85%, and place it in an environment with good ventilation.
4. Some customers say that the equipment is a bit noisy, so we should consider whether the equipment is on a level surface, and the equipment should not be tilted too much when placed, because uneven force will affect the use.
5. The equipment should not be exposed to the sun. Long-term exposure will make the temperature of the cabinet shell too high.
6. Keep away from combustibles, explosives, chemicals, and high-temperature heat sources, which may cause safety hazards.
7. Try to place it in a place with little dust. If there is too much dust, it will adhere to the parts. For example, if there is too much dust on the fan, it will not operate well. A series of factors will affect the temperature uniformity in the box and the use of the fan. high and low temperature test chamber
8. The power plug should not be too far away, because the length of the power cord of the high and low temperature test chamber is limited, and long-term pulling will short-circuit the internal pipeline of the power cord.



Prev New Next New