Shock Response Spectrum Test System
Pneumatic shock response spectrum tester is used to measure and determine the shock resistance of electrical and electronic products or packaging, and to evaluate the reliability and structural integrity of the test product in a shock environment. The shock response spectrum is the total result of a series of single-degree-of-freedom linear systems with different natural frequencies subjected to the same shock excitation response. When a product is subjected to an impact, the maximum value of its impact response means that the product has a maximum stress. Therefore, the shock response spectrum tester can better simulate the shock wave and shock energy suffered in the real environment.
- Product Details
Pneumatic shock response spectrum tester is used to measure and determine the shock resistance of electrical and electronic products or packaging, and to evaluate the reliability and structural integrity of the test product in a shock environment. The shock response spectrum is the total result of a series of single-degree-of-freedom linear systems with different natural frequencies subjected to the same shock excitation response. When a product is subjected to an impact, the maximum value of its impact response means that the product has a maximum stress. Therefore, the shock response spectrum tester can better simulate the shock wave and shock energy suffered in the real environment.
1200mm table size withstand 1000kg load.
Windows-based stable control system, full-automatic remote-control interface.
The control & measurement system has built-in SRS specifications and tolerances, which is convenient for users to adjust and apply. It automatically completes the test and generates reports.
Adjust the driving shock energy by adjusting the air pressure, which is convenient to operate and high in efficiency.
The equipment takes up a small area and is easy to install.
Maximum load
50kg
Maximum shock response acceleration
80000m/s2
Shock response spectrum
Meet the standard requirements
Performance indicators
Meet GJB150A and MIL-STD-810F requirements
Response spectrum tolerance
± 12 dB rising slope : 6--12 dB
Response spectrum frequency
10~5000Hz
MTBF
≥1000H
Pendulum rotation direction
Clockwise when facing the motor output shaft
Drive motor
Three-phase asynchronous motor YEJ100L2-4
P=3Kw N=1500r/min
Test machine work surface size
400 × 400mm (or 500X500 )
Test machine dimensions
1800×1600×1800mm
Test machine weight
About 4 000Kg
Measurement and Analysis System
Measure time domain, frequency domain waveform and print experimental results
Measuring frequency range: 10 ~ 8000Hz
A/D digits: 16 digits