Uses and specifications of electromagnetic vibration test bench

What we are introducing today is that the electromagnetic vibration test bench (vertical table body) is easy to install, simple to operate, low noise, maintenance-free, and long-term. The machine with no resonance structure, well-designed, and the airbag cushion can effectively isolate the vibration of the floor group.

According to standards: This machine complies with IEC68-2-6 (FC), GB2423, JJG189-97, GB/T13309 testing machine specifications.

Specifications of electromagnetic vibration test bench:

Directional vibration function: sine wave (half wave/full wave), frequency modulation, sweep frequency, programmable, frequency multiplication, logarithm, time control, simple acceleration, simple fixed amplitude;

Vibration table size: L1000×W1000×H (6~10) mm, there are 25 10mm threaded holes on the top and 4 holes about 7cm in the center of each side;

Vibration direction: vertical (Z) axis

Frequency modulation function: arbitrarily adjust 1～600Hz, any frequency within the frequency range cannot exceed one of the following 2 items (maximum acceleration <20G and maximum amplitude <5mm)

Sweep frequency function: arbitrarily adjust 1～600Hz, (upper frequency band/lower frequency band/time range) can be arbitrarily set the true standard to sweep back and forth

Applicable temperature and humidity range and noise: temperature: -10℃～＋60℃, humidity: 10%R.H～90%R.H, noise: below 60 decibels