What work should be done to suspend the use of cold and hot impact test chamber?

Some users in the purchase of hot and cold impact test chamber, may be due to some reasons and need to do not use the equipment for a period of time, intend to seal the equipment. So after the use of the equipment, not as long as the power can be unplugged, but need to carry out some maintenance work, can seal the equipment.

First, to seal the device the first thing to do is unplug it, but take care to keep it safe. After the hot and cold impact test chamber chamber cleaning. Take out the sample in the chamber, and clean the inside of the studio, and let it dry.

Secondly, the case is to see the seal on the door to wipe clean, to smear talcum powder on the seal and pad a thin paper in the contact of the door, this is because the seal is made of rubber, long time contact may appear the phenomenon of bonding.

At the end of the cold and hot impact test chamber, the button of the temperature controller should be adjusted to the closed state, which can make the spring of the controller in a relaxed state, which can improve the service life. Then after finishing this step, to open the door of the equipment, ventilation, as far as possible for 2 days.