Edit | Huanyi instrument The low pressure test of electronic products meets the standard of "GB/T 2423.21-2008 Environmental test of electrical and electronic products Part 2: Test method test M: low pressure". The purpose of low pressure test of electronic products is to determine the...
Edit | Huanyi instrument High altitude low pressure test chamber is a device used to simulate high altitude and low pressure environments, commonly used to test the performance of various materials and products under these conditions. Because of the wide application of high altitude low...
Edit | Huanyi instrument KS C IEC 60068-2-13-2022 is the standard for environmental tests in Korea. Part 2-13 describes test M: Low pressure. The purpose of the test is to assess the performance and reliability of the electronic equipment at high altitude and low pressure, and to test whether it...
Edit | Huanyi instrument High altitude low pressure test chamber is a device used to simulate high altitude and low pressure environments, commonly used to test the performance of various materials and products under these conditions. Because of the wide application of high altitude low...
Edit | Huanyi equipment The simulated low pressure test chamber is a kind of equipment which can simulate the climatic conditions in the plateau area. It is mainly used to study the change and adaptability of electronic, aviation, instrument and other products under the plateau environment....
1. The installation location should take into account heat dissipation and maintenance of the usually easy to inspect location 2. The distance between the running wall and other machines should have a small distance of more than 600mm. 3. Set on the ground without...
Xenon lamp aging test chamber is a comprehensive climate test device. In addition to climate aging test, it can also be used to test the light resistance of high score materials. That is, polymer materials are exposed to artificial light source simulating the sunlight spectrum through glass to evaluate the...
1, power supply: high and low temperature impact test chamber power supply with three-phase five lines, four core cable equipment, three-phase line, a line of zero. Due to some single-phase load equipment and control system, the wrong zero-damage equipment does not work, resulting in the equipment grounding ice...
Product characteristics of high and low temperature impact test chamber 1. The refrigerating unit adopts fully enclosed compressed-commercial shrinking machine. 2. The freezing system adopts the design of binary cryogenic loop system. 3, the...
Some users in the purchase of hot and cold impact test chamber, may be due to some reasons and need to do not use the equipment for a period of time, intend to seal the equipment. So after the use of the equipment, not as long as the power can be unplugged, but need to carry out some maintenance work, can seal the...
In our use of rapid temperature change chamber in the process, especially when the humidity deviation, the sudden problem let many customers at a loss. In fact, humidity deviation is also a common phenomenon. There are many factors that cause humidity deviation. In the humidity and heat test of rapid...
High and low voltage relays control the start and stop of the compressor in the fast temperature test chamber during operation, but most of the high voltage relays can only be restarted manually after tripping. Therefore, the multiple start and stop of the compressor is usually not caused by the high voltage...
