Introduction of Programmable Controller for Constant Temperature and Humidity Test Chamber

1. Temperature and Humidity Test Chamber adopt super sensitive LCD display touch controller, easy to operate and edit;

2. The controller operation interface is available in Chinese and English;

3. With a capacity of 100 groups of programs, 1000 segments, 999 cycles, each segment of time can be set to a maximum of 99 hours and 59 minutes;

4. After data and test conditions are entered, the controller has a screen lock function to avoid shutdown due to human touch;

5. With PID automatic calculation function, the temperature and humidity change conditions can be corrected immediately, so that the temperature and humidity control is more accurate and stable;

6. With RS-232 communication interface and connection software, it has the functions of designing programs on the computer, monitoring the test process, and executing the switch machine;

7. With 9-point fault message prompt, if an abnormal situation occurs during operation, the power supply can be cut off and the cause of the fault will be displayed on the screen;

8. It can provide temperature and humidity linear DC signal output to the temperature and humidity recorder to understand the status of the test conditions, and then provide the test reliability;

9. Memory: Data memory can be stored for more than 10 years.