Temperature Cycle Testing (TCT), or simply temperature cycling or temp cycling, determines the ability of parts to resist extremely low and extremely high temperatures, as well as their ability to withstand cyclical exposures to these temperature extremes. A mechanical failure...
Failure acceleration due to Thermal Shock and Temp Cycling depends on the following factors: 1) the difference between the high and low temperatures used; 2) the transfer time between the two temperatures; and 3) the dwell times at the extreme...
Why should the cold and heat shock equipment be defrosted? The frost in the thermal shock box grows on the energy storage components in the pre-cooling zone. Why is it always necessary to defrost the hot and cold shock?...
First, high and low temperature test chamber check whether the water supply of the humidity system is normal, and then whether the cooling and cooling are normal. Sometimes the compressor is not cooling, and there is no way to cool the air into cold air, and the humidity cannot be lowered. If the refrigeration...
Beautiful appearance is very important, craft details are even more important! Process is one of the key factors that determine the level of product quality!
1. Use of damp heat test chamber Wet ball gauze (wet ball paper) used in the damp heat test box has certain requirements, not any gauze can be substituted, because the relative humidity reading is the difference between the root distance and the temperature and humidity, strictly speaking, it is...
1. Preparation before using the high and low temperature test chamber When doing the high and low temperature test chamber environmental test, you must be familiar with the sample performance, test conditions/test procedures and test techniques to be tested, familiar with the technical...
(1) Normalization processing Put the test samples into the normal test gas uniformly until the corresponding temperature is stable. (2) Initial inspection The whole process of high and low temperature test chamber destructive environmental test chamber test: 1. Put the...
The high and low temperature test chamber is suitable for high temperature and low temperature reliability tests of industrial products. Test various performance indicators for parts and materials of related products such as electronics and electrical engineering, automobiles and motorcycles, aerospace, marine...
The test equipment industry is a typical knowledge-intensive and technology-intensive industry, and its products are sensitive to new technologies and can be updated quickly. Therefore, it is a multidisciplinary complex. It has high technology, high input, high output, low energy consumption, low material...
The test equipment industry is a typical knowledge-intensive and technology-intensive industry, and its products are sensitive to new technologies and can be updated quickly. Therefore, it is a multidisciplinary complex. It has high technology, high input, high output, low energy consumption, low material...
On June 24, 2021, a batch of Bacteria aerosol chambers of HUANYI passed the commissioning and inspection, and the staff quickly completed the outer box packaging work, and shipped them out of the warehouse to customers today. This batch of equipment was ordered by a customer in Xiamen, Fujian. The customer...