The 1m3 environmental test chamber is shipped to the Hong Kong Research Institute for VOC test, photocatalytic test, sterilization test, etc.
1. Scope of application The purifier environmental test chamber is mainly suitable for promoting air purifiers with odor removal function 2. Operation steps 2.1 Put the prototype in a 30m3 test chamber, adjust the purifier to the rated state of the test, check that it runs normally, and then turn...
Before the test of the particulate matter purifier test chamber, the equipment for pollutant generation, measurement and recording should be in normal use. The performance, uncertainty, and range of test instruments and meters should meet the following measurement requirements: 1.Particle mass concentration...
1. Reference standard: HJ/T 4002007 "Method for sampling and determination of volatile organic compounds and aldehydes and ketones in vehicles" GB/T 27630 "Guidelines for Air Quality Evaluation in Passenger Cars" 2. Test equipment for testing: Automobile volatile organic compound test...
1. Components: The large-scale overall furniture VOC release climate chamber is composed of the cabin body, sample inlet, air circulation device, air exchange device, air purification device, temperature and relative humidity control device, monitoring device, concentration calibration detection port,...
The formaldehyde emission test chamber is developed and produced according to the new GB18580-2017 standard. It can detect the formaldehyde emission of furniture, composite wood floors, carpets, etc. By detecting the formaldehyde emission, we can exclude products with excessive...
Under normal circumstances, after the decoration is completed, some decoration pollution will remain in the room, and as time goes by, the pollutants in the building materials will continue to volatilize, affecting human health. A variety of man-made panels are usually used in people's furniture, and man-made panel...
1. Test conditions of the environmental test chamber of the purifier: Except for the tests specified separately for the test environmental conditions, the test should generally be carried out indoors where the ambient temperature is (25±2) ℃, the relative humidity is (50±10)%, and there is no external...
Today, a batch of constant temperature and humidity test chambers of Huanyi Instrument will be shipped to Thailand. Constant temperature and humidity test chambers and thermal shock test chambers have become hot-selling products in China, mainly to detect whether the products can work normally and aging in high...
The constant temperature and humidity test chamber is suitable for conducting high and low temperature tests on electrical, electronic, mechanical and other products, parts and materials, damp heat tests, and quality and reliability tests on products, parts and materials under simulated temperature and...
------Huanyi Industry (Hong Kong) Limited extracted from GB18801 Product name: Purifier CADR Test Chamber, Purifier CCM Test Chamber, Purifier Clean Air Volume Test Chamber Concept introduction: 1. Natural attenuation In the specified space and conditions, due to non-human factors such as...
1. Equipment name: PM2.5 particulate matter test chamber, pollutant performance test chamber, PM2.5 purifier performance test chamber. 2. The target pollutant composition of the PM2.5 particulate matter test chamber: mainly particulate matter, gaseous pollutants, microorganisms and other types. 3....