The constant temperature and humidity test chamber can be divided into "desktop" and "vertical". The main difference is that the temperature and humidity that can be achieved are different, and the resulting temperature will also be different. The vertical type can be used for low temperature and dryness below...
The temperature adjustment of the Constant Temperature and Humidity Test Chamber is through the built-in temperature sensor of the box, collecting data, adjusting by the temperature controller (micro information processor), turning on the air heating unit to increase the temperature or adjusting the cooling...
1. Whether the power cord is properly installed in accordance with the specifications and is actually connected to the ground wire. high and low temperature test chamber 2. Note: The gauze should be removed when the temperature is only used. If the gauze is operated at a high temperature above 85℃, the...
The high and low temperature test chamber sample area sensor and channel are equipped with an over-temperature maintenance device, and an over-temperature maintenance device is installed on the operation panel. When the temperature in the experimental area exceeds the allowable temperature set on the panel, the...
Three comprehensive test box function Removable USB smart stick storage allows users to easily access data, programs, alarms, and index functions. A comprehensive test environment that simulates three environmental factors in the same cabinet.Three comprehensive test box Flexibility-The test...
1. spray test chamber Both the inner and outer tanks are integrally molded with epoxy glass fiber reinforced plastic, which has the characteristics of light weight, corrosion resistance, high strength, no leakage, smooth surface, smooth and easy to clean. 2. The water-sealed form prevents the salt mist...
Dear users, in order to ensure that the constant temperature and humidity test box, high and low temperature test box and other products you choose are economical and practical, when you choose the products of Goldman Sachs laboratory equipment, please be sure to confirm the constant temperature and humidity test box...
Common humidity measurement methods are: dynamic method (double pressure method, dual temperature method, split flow method), static method (saturated salt method, sulfuric acid method), dew point method, dry and wet bulb method and electronic sensor method. ① The dual pressure method and dual temperature method are...
The place where the high and low temperature test chamber equipment is installed must meet the following conditions: 1. The ambient temperature of the installation site should not change too much. The large temperature difference between cold and hot will inevitably affect the high temperature box. 2. Keep away from...
1) First check constant temperature and humidity test chamber Start by checking the under-water over-temperature protector in the control room to see if it is set at 150°C. If it is not set at 150°C, please turn the under-water over-temperature protector to 150°C; 2) Check again to check whether the pipeline...
high and low temperature test chamber When the air in the test box passes through the open water surface, heat and moisture exchange occurs with the water surface. Depending on the water temperature, only sensible heat exchange may occur, or both sensible heat exchange and moisture exchange...
1. After each test, you need to drop the drop arm to prevent the spring from being deformed by the long reset drop arm, which will affect the test effect. Please reset the position before the motor stops rotating before pressing the drop button. 2. After the new machine is installed in the factory, it...